Below are the range of LiDAR USA/Telodyne/Riegl sensors we can supply and support within Australia and New Zealand. All Lidar can have RGC, multispectral, hyperspectral or thermal sensors added to modify the 3d point cloud. All can be modified for backpack or vehicle applications. Full software and pointcloud hosting support.
Please contact us for sample data.
Surveyor Series
The Surveyor is our dual use UAV and or MMS LiDAR system. It can be combined with single or dual cameras to provide your customers with RGB colorized LiDAR points clouds. This system is very accurate and can be tied into control directly in our software. Perfect for smaller UAV application/ Car based survey/ backpack survey. 32 Channel, Two Return, 1,280,000 points per second (dual return) 100 m AGL.
The Revolution LiDAR Series is our UAV only system, available at a great price and future up-gradable to our ground A-Series System. It can be combined with several different cameras to provide your customers with RGB colorized LiDAR points clouds.Perfect for larger UAV Applications. Usable with both the Galaxy and ScanLift UAS.
REVOLUTION 120
Designed for medium UAV missions and can be upgraded to a ground platform.
The Snoopy A-Series is small and configurable but is designed to be an extremely accurate solution for multi-vehicle mounting. The ASeries is light-weight and easy to use. With just a click of a button on your smartphone you can scan over the edge of a boat, the front of a motorcycle, the belly of a drone, the back of a sedan, the side of a train, on top of a back-pack… Well, you get the picture! You can scan anywhere with this little guy.
Snoopy A Series
Designed for ground based and UAV missions. L1/L2 GPS+GLONASS (or Beidou). SBAS, Single antenna. Velodyne HDL-32E.
Contending as a featherweight (less than 3kg) , the Snoopy V series covers large areas quickly with a tactical grade INS; 8, 16, or 32 laser LiDAR unit; and built-in on-board computer. It harnesses a force to be reckoned with on any mobile platform.
Key specs
Weight – 2.51kg
700,000 points/sec
32 Lasers
+/- 2cm accuracy
100m range
Sample data
Snoopy MiniVUX
An extremely lightweight system designed for small UAV or ground applications. Designed to easily move between both. Optimise your ROI, spend more time scanning.
Key specs
Weight – 2.51kg
700,000 points/sec
60+ Acres one flight
3.1cm @ 50m AGL
142mm (L) x 99mm (w)
Quick release
Sample data
Snoopy CL-360
One of our most popular units for good reason.
Mountable to UAV or Car, the Snoopy CL-360 can capture even the smallest static wire when performing utility corridor surveys etc.
These are high accuracy, lightweight, compact and rugged laser scanners than are easily mountable to large UAS such as the Galaxy, cars, trains, helicopters and robots. Available in short and long range units.
Telodyne OPTECH CL-90
CL-90 is designed for exceptional canopy penetration, low-noise, high-quality survey-grade data.
Key specs
176 m (500 kHz) to 633 m (50 kHz)
Pulse 500, 200, 50 kHz (Programmable)
Ang resolution 12 urad
Scan FOV 64-90°
20 – 52 lines/sec (10-26 Hz)
Scan product 860 maximum
VUX-1HA/1UAV
High accuracy, compact and rugged unit deisgned to attach to ground based vehicles such as cars, moving platforms, trains, robots.
Key specs
3.2cm +/- @ 50m
3.5lbs
200 scans/sec
REIGL VUX – Max range 1000m
Rate up to 500,000 measure/sec
Quick release mount
Sample data
Contact us
Long Range VUX-1LR
Compact, rugged and specifically designed for airborne surveying missions from helicopters and other small aircraft.